Pearl® Professional instantly creates Maximum Showroom Shine in Minimum Time!
Available in ready-to-use and super-concentrate formulations.
To achieve the optimum working solution:
Ensure concentrate is mixed thoroughly prior to decanting and dilution.
Dilute 1 part concentrate with 9 parts water (1:9).
E.g. 1 Litre of Professional Concentrate makes 10 Litres of ready-to-use product.
Directions for Ready To Use product application (RTU):
Shake well before use.
1. Mist spray of Professional onto a folded microfiber cloth and onto the surface area to be cleaned.
2. Gently wipe the product onto the surface with a pre-wetted folded microfibre cloth.
3. Using a second clean folded microfibre cloth, quickly, buff off the remaining residue to impart a deep gloss shine. Replace cloths if they become too soiled. Repeat the process until the whole vehicle is clean and highly polished.
Depending on dirt severity approximately 160ml of ready to use product will clean, highly polish and wax a standard sized saloon car.
Can be used in the sun (heat on the exterior surfaces may cause increased usage due to evaporation), but for best results use in the shade out of direct sunlight. Can also be used on a wet or dry surface.
Do not use on heavily soiled surfaces with a build-up of mud, caked-on sand or any other abrasive materials.
Do not use on Matt finishes – Use diluted Pearl® Universal Concentrate Cleaner (#PL008) in the standard ready to use format for a factory finish.
Typical Specification :
|Composition||: A complex blend of surfactants and waxes in a water base.|
|Appearance||: Free-flowing liquid|
|Shelf Life||: Two years in unopened containers at|
|Packaging||: 750ML, 25L, 205L, 1000L|