Pearl® Scratch Remover and Polish is an outstanding multi-purpose rubbing compound designed to remove paint imperfections; scratches, holograms (micro-scratches and rotational swirl marks that are most commonly left behind following harsh roller-brush car washes), oxidization, bird lime etching and scarring from all vehicle paint types.

Scratch Remover is very easy to apply and quick to buff off, producing a superior blemish-free gloss finish that permanently removes imperfections and ensures that the final vehicle presentation is returned back to new trade quality standards.

This extremely versatile product can be used by hand or by machine for rapid coverage of large polishing areas to revitalise loss of paint lustre together with unique capabilities such as headlamp restoration of all plastic/acrylic headlamps to remove scratches, scuffs, yellowing, etc.

Specially formulated and containing no silicones Scratch Remover is completely body shop safe.

FOR HAND OR MACHINE USE

Scratch, Swirl Remover & Polish: A specially formulated super fine compound designed to polish out any residual swirl marks which can occur on problem colour dark paint finishes e.g. Blacks.

Versatile: Scratch Remover can be used by hand or by machine for rapid coverage of large polishing areas e.g. Bonnets, roofs.

Rectification/Polishing Capabilities: Removes abrasive scratches from P1500 to P4000 and finishes in one process.

Paint-Shop Safe: Scratch Remover is silicone and wax-free.

Easy and Fast to Use: Easy to apply and quick to buff.

Deep Gloss Shine: Produces a superb high gloss finish.

Low VOC: Specially formulated with minimum use of organic solvents.

For Use On: All automotive paint systems including, cellulose, single component and 2-pack acrylic clear coats, MS/HS paint systems, ceramic clear coats, UV clear coats, and waterborne clear coats. (Scratch Remover cuts and polishes and therefore not compatible with matt paint finishes).

Health & Safety: Silica Free. Non-flammable.

Directions for use: Shake well before use.

By Hand: Use soft Pearl® Pro Microfibre Cloths or 100% cotton cloth to avoid introducing any scratches to sensitive paint finishes. 

Apply to paint surface, allow polish to haze dry for a minute, then buff to a high gloss finish using non-scratch Pro Microfibre cloth.

By Machine: Use Machine Speed: 1200 – 2000 (free-running) speed soft foam Polishing Pads.

For vertical surfaces: charge the white soft foam pad with Scratch Remover.

For horizontal surfaces: Scratch Remover can be applied to a soft foam pad and/or directly onto the panel.

1.      Apply Scratch Remover to the paint surface and spread to a thin even layer, using the polishing pad.

2.      Using the buffing machine, polish up the paint surface reducing the pressure as the film starts to clear.

3.      Continue to float the surface with an un-pressured pad and when clear finally remove any trace residues using a microfibre cloth.

Note: For swirl removal, it is essential to keep polishing pads clean and separate from compounding pads. Prior to polishing remove any dust or compounding residue must be washed off the vehicle surface using a non-silicone based product such as Pearl Universal Cleaner. Not to be used on matt-lacquered finishes.

Product Code: PL053
Packaging: 6x500G plastic containers