Advanced Heavy‑Duty All‑in‑One Cutting Compound for Harder Lacquers, Clear Coats & Gel Coats

Pearl Cerami HD is a technically advanced, all‑in‑one cutting compound engineered for harder lacquers, ceramic clear coats, and marine gel coats. Its high‑precision micro‑oxide technology rapidly removes deeper scratches, heavy swirl marks, sanding marks, and oxidisation from all automotive and marine paint systems. Cerami HD restores clarity, enhances colour depth, and delivers a true mirror‑gloss finish, making it the ideal preparation base for Pearl Nano Ceramic Coating Quartz 9H Protective (PL077) and Pearl Nano Seal (PL070) surface protective applications.

Outstanding Cutting & Correction Performance

• Quickly eliminates scratches, swirls, oxidation, and sanding marks
• Removes P1200 sanding marks, P1500 sanding marks on aged paint, and P1500–P3000 sanding marks on newly painted panels
• Produces a deep, reflective gloss finish on harder lacquer systems and gel coats
• Ideal for automotive, marine, commercial, and industrial paint rectification

Advanced Lubrication System for Extended Working Time

• Unique lubrication technology allows prolonged polishing without drying out
• Ensures smooth, consistent cutting action with reduced dusting
• Supports a wide range of wool and foam pad combinations
• Enables a flawless, blemish‑free finish even on challenging surfaces

Pad Flexibility for Maximum Control

• Lambswool pads for maximum cutting power
• Foam pads for refining, swirl removal, and high‑gloss finishing
• Allows precise adjustment of cut and finish across all paint systems

Professional Rectification Capabilities

• Heavy scratch and oxidation removal
• P1200–P3000 sanding mark elimination
• Swirl mark removal and gloss enhancement
• Suitable for both older-aged paintwork and newly applied coatings

Non‑Cosmetic, Body Shop Safe Formula

• Contains no silicones, no ammonia, and is silica‑free
• Completely paintable, non‑flammable, and body shop safe
• Leaves no fillers, ensuring genuine defect removal with minimal drop‑back on dark colours
• Provides fast, clean wipe‑off and easy post‑polish clean up

Approved for All Automotive & Marine Paint Systems

Suitable for:

• Water‑based, HS high‑solids, MS, infrared‑cured, and accelerator‑cured paints
• Single‑component and 2‑pack systems
• Acrylic, cellulose, synthetic, and OEM finishes
• Nano‑ceramic clear coats and scratch‑resistant clear coats

Directions for Use

Shake well before use.

Application Advice

• Use sparingly — do not over‑apply or overload the pad
• On soft or sensitive paint, or where heat build‑up may occur, apply a light mist of water to reduce friction
• Avoid excessive water; once a new pad is activated, no additional water is required once impregnated with product

1. Product Application

Apply small, controlled amounts of Cerami HD to the paint surface. Work with a machine polisher at a free‑running speed of approximately 1500 RPM, using only the minimum amount required for each section.

2. Correction Phase

Work the surface using medium pressure until scratches, sanding marks, and imperfections are removed.

3. Polishing Phase

As the pad begins to glide freely, reduce pressure to allow the polishing action to refine the finish and build gloss.

4. Residue Removal

After compounding, wipe away residue using a clean, soft, high‑quality Pro Microfibre Cloth and buff to a high‑gloss finish.

5. Repeat if Necessary

Repeat Steps 1–3 if deeper defects remain.

Typical Specification